2022

  1. Soni, R., Ponappa, K. and Tandon, P., 2022. A review on customized food fabrication process using Food Layered Manufacturing. LWT - Food Science and Technology, 161, pp.1-8. doi: 10.1016/j.lwt.2022.113411
  2. Kumar, P., Priyadarshi, S. and Tandon, P., 2022. Investigating the incremental forming capabilities of extra deep drawn steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(5), pp.2352-2362. DOI:10.1177/09544062211027201
  3. Sharma, M., Gupta, V.K. and Tandon, P., 2022. Numerical Analysis of the effects of Ultrasonic Vibrations and Elevated Temperature in Incremental Sheet Forming, Proc. IMechE Part C: Journal of Mechanical Engineering Science [Accepted]
  4. Kumar, P. and Tandon, P., 2022. Investigating the Capability of Lemaitre Damage Model to establish Incremental Sheet Forming Process. Archives of Civil and Mechanical Engineering [Accepted]

2021

  1. Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2021. Numerical and experimental analysis of heat transfer in inductive conduction based wire metal deposition process. Proc. IMechE Part C: Journal of Mechanical Engineering Science. DOI: 10.1177/09544062211028267
  2. Kumar, P. and Tandon, P., 2021. Design Decision in the manufacturing environment using an improved multiple criteria performance evaluation method. Arabian Journal for Science and Engineering, Ref. No. AJSE-D-21-01584 [08-03-2021] [AJSE-D-21-01584R1: 22-05-2021] [Accepted]
  3. Li, J., Gao, H., Kong, C., Tandon, P., Pesin, A.,and Yu, H., 2021. Mechanical properties and thermal stability of gradient structured Zr via cyclic skin-pass cryorolling. Materials Letters, 302(1), pp. DOI: 10.1016/j.matlet.2021.130406
  4. Kumar, P., Priyadarshi, S. and Tandon, P., 2021. Investigating the Incremental Forming Capabilities of Extra Deep Drawn Steel. Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 0(0), pp.1-11. DOI: 10.1177/09544062211027201
  5. Pustovoytov, D., Pesin, A. and Tandon, P., 2021, Asymmetric (Hot, Warm, Cold, Cryo) Rolling of Light Alloys: A Review, Metals, 11(6), pp.956. DOI: 10.3390/met11060956
  6. Wang, L., Kong, C., Tandon, P., Pesin, A., Yu, H. and Pustovoytov, D., 2021, Effect of rolling temperature on the mechanical properties of an Al-Cu-Li alloy via cryorolling and ageing, Metals, 11(6), pp.853. DOI: 10.3390/met11060853
  7. Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2021. Analysis of Novel Induction Heating Extruder for Additive Manufacturing using Aluminium Filament. Proc. IMechE Part B: Journal of Engineering Manufacture. DOI: 10.1177/09544054211014451
  8. Amar, A.K. and Tandon, P., 2021. Investigation of Gelatin Enabled Abrasive Water Slurry Jet Machining (AWSJM). CIRP Journal of Manufacturing Science and Technology. 33, pp.1-14 DOI: 10.1016/j.cirpj.2021.02.005
  9. Kumar, P. and Tandon, P., 2021. Process Capabilities of Commercially Pure Titanium Grade 2 formed through Warm Incremental Sheet Forming. Proc. IMechE Part B: Journal of Engineering Manufacture, , DOI:10.1177/0954405421995669
  10. Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021. Performance evaluation of the data clustering techniques and cluster validity indices for efficient toolpath development for Incremental Sheet Forming. ASME Journal of Computing and Information Science in Engineering, 21, pp.031001-1-11. DOI:10.1115/1.4048914
  11. Telang, V.S., Pemmada, R., Thomas, V., Ramakrishna, S., Tandon, P. and Nanda, H.S., 2021. Harnessing Additive Manufacturing for Magnesium Based Metallic Bioimplants: Recent Advances and Future Perspectives, Current Opinion in Biomedical Engineering. 17, pp.100264 DOI: 10.1016/j.cobme.2021.100264
  12. Singh, S.A., Priyadarshi, S. and Tandon, P., 2021. Exploration of appropriate Tool Material and Lubricant for Elevated Temperature Incremental Forming of Aluminium Alloy. International Journal of Precision Engineering and Manufacturing, 22(2), 217-225 DOI: 10.1007/s12541-020- 00447-0
  13. Singh, S.A., Priyadarshi, S. and Tandon, P., 2021. Comparative study of Incremental Forming and Elevated Temperature Incremental Forming through Experimental Investigations on AA 1050 sheet. ASME Journal of Manufacturing Science and Engineering, 143(6), pp.064501-1-7. DOI:10.1115/1.4049093
  14. Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2021, CFD analysis in a heating bed with two inlet and one outlet cooling configuration for application in AM process, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.11.224

2020

  1. Mishra, A., Singh, R. and Tandon, P., 2020. Ergonomics Risk Factor among Hairdressers Working in India: A Case Study. Ergonomics International Journal, 4(4): 000252. doi:10.23880/eoij-16000252
  2. Sharma, G., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. On the suitability of induction heating system for metal additive manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(1-2), pp.219-229. DOI:10.1177/0954405420937854
  3. Bhatta, L., Pesin, A., Zhilayaev, A.P., Tandon, P., Kong, C., Yu, H., 2020, Recent Development of Superplasticity in Aluminum Alloys: A Review, Metals, 10(1), 77; doi:10.3390/met10010077
  4. Lakhera, S., Priyadarshi, S. and Tandon, P., 2020. Post-Processing of Metal Additive Manufactured Parts through Ring Rolling. In: Horváth I., Keenaghan G. (Eds) Proceedings of Thirteenth International Tools and Methods of Competitive Engineering Symposium (TMCE 2020), Dublin, Ireland, 11-15 May 2020. TMCE 2020 Repository, pp.613-623. tmce.io.tudelft.nl/proceedings ISBN/EAN: 978-94-6384-131-3

2019

  1. Singh, S.A., Priyadarshi, S. and Tandon, P., 2019. Investigations on the Influence of heat on AA1050 sheet during Incremental Forming. Letters on Materials, 9(4s), pp.523-527. doi: 10.22226/2410-3535-2019-4-523-527
  2. Deokar, S.U., Jain, P.K., Tandon, P. and Pathak, A., 2019. Analysis of Springback and Force behavior in Single Point Incremental Sheet Forming though FEA. Material Today: Proceedings, 18(7), pp. 3330-3339. doi:/10.1016/j.matpr.2019.07.254
  3. Shrivastava, P. and Tandon, P., 2019. Microstructure and texture based analysis of forming behavior and deformation mechanism of AA1050 sheet during Single Point Incremental Forming. Journal of Materials Processing Technology, 266, pp.292-310. doi: 10.1016/j.jmatprotec.2018.11.012
  4. Shrivastava, P. and Tandon, P. 2019. Effect of preheated microstructure vis-à-vis process parameters and characterization of orange peel in incremental forming. Journal of Materials Engineering and Performance, pp.1-13. doi: 10.1007/s11665-019-04032-z
  5. Tiwari, V., Jain, P.K. and Tandon, P., 2019. An integrated Shannon entropy and TOPSIS for product design concept evaluation based on bijective soft set. Journal of Intelligent Manufacturing, 30(4), pp.1645-58. doi:10.1007/s10845-017-1346-y
  6. Kumar, P. and Tandon, P., 2019. A paradigm for customer-driven product design approach using extended axiomatic design. Journal of Intelligent Manufacturing, 30(2), pp.589-603. doi:10.1007/s10845-016-1266-2
  7. Kumar, N., Jain, P.K., Tandon, Puneet and Pandey, P.M., “Investigations on the melt flow behavior of aluminium filled ABS polymer composite for fused deposition modeling", International Journal of Materials and Product Technology (IJMPT). [Accepted]

2018

  1. Deokar, S.U., Jain, P.K., and Tandon, P., 2018. Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis. Material Today: Proceedings, 5(11/3), pp. 25430-25439. doi:10.1016/j.matpr.2018.10.348
  2. Khan, A. and Tandon, P., 2018. Realizing the end-of-life considerations in the design of food packaging. Journal of Packaging Technology and Research, 2(3), pp.251-263. doi:10.1007/s41783- 018-0041-6
  3. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Investigation on the effects of process parameters in CNC assisted pellet based fused layer modeling process, Journal of Manufacturing Processes, 35, pp.428-436. doi:10.1016/j.jmapro.2018.08.029
  4. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA). Journal of Manufacturing Processes, 35, pp.317-326. doi:10.1016/j.jmapro.2018.08.013
  5. Singh, S.K. and Tandon, P., 2018. Heterogeneous modeling based prosthesis design with porosity and material variation. Journal of the Mechanical Behavior of Biomedical Materials, 87, pp.124-131. doi:10.1016/j.jmbbm.2018.07.029
  6. Khan, A. and Tandon, P., 2018. Design from Discard: : A Method to Reduce Uncertainty in Upcycling Practice. Design and Technology Education: An International Journal, 23(2), pp.129-153. doi:https://ojs.lboro.ac.uk/DATE/article/view/ 2236/2712
  7. Shrivastava, P. and Tandon, P., 2018. Enhancement of Process Capabilities and Numerical Prediction of Geometric Profiles and Global Springback in Incrementally Formed AA 1050 Sheets. Transactions of the Indian Institute of Metals, 71(9), pp.2145-2155. doi:10.1007/s12666-018- 1346-4
  8. Shrivastava, P., Kumar, P., Tandon, P. and Pesin, A., 2018. Improvement in formability and geometrical accuracy of incrementally formed AA1050 sheets by microstructure and texture reformation through preheating, and their FEA and experimental validation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7), pp.335. doi:10.1007/s40430-018- 1255-9
  9. Singh, R. and Tandon, P., 2018. Framework for improving universal design practice. International Journal of Product Development, 22(5), pp.377-407. doi:10.1504/IJPD.2018.093433
  10. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Additive manufacturing of flexible electrically conductive polymer composites via CNC-assisted fused layer modeling process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), pp.175. doi: 10.1007/s40430-018-1116-6
  11. Soni, S., Tandon, P. and Khanna, P., 2018. Knowledge system for early phase aesthetic concept generation in industrial design. International Journal of Intelligent Systems Design and Computing, 2(1), pp.45-75. doi:10.1007/s10115-018-1159-0
  12. Kumar, P. and Tandon, P., 2018. Bionic knowledge and information reuse methodology for uncertainty minimization in product design. Knowledge and Information Systems, 57(2), pp.287- 309. doi:10.1007/s10115-018-1159-0
  13. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Extrusion-based additive manufacturing process for producing flexible parts. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(3), pp.143. doi:10.1007/s40430-018-1068-x
  14. Kumar, N., Jain, P.K., Tandon, P., and Pandey, P.M., 2018. 3D Printing of Flexible Parts using EVA material, Material Physics and Mechanics, 37(2), pp.124-132. doi:10.18720/MPM.3722018_3
  15. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Experimental investigations on suitability of polypropylene (PP) and ethylene vinyl acetate (EVA) in additive manufacturing. Materials Today: Proceedings, 5(2), pp.4118-4127. doi:10.1016/j.matpr.2017.11.672
  16. Tandon, P. and Sharma, O.N., 2018. Experimental investigation into a new hybrid-forming process: Incremental stretch drawing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(3), pp.475-486. doi:10.1177/0954405416645983
  17. Vispute, M., Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M. 2018. Shrinkage compensation study for performing machining on Additive Manufactured parts, Material Today Proceedings, 5(9:3), pp.18532-18539. doi:10.1016/j.matpr.2018.06.197

2017

  1. Kumar, Prabhat and Tandon, Puneet, “A Hybrid Multiple-Criteria Based Approach for Concept Selection in Product Design”, Concurrent Engineering: Research and Applications [Accepted for Publication]
  2. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “An Integrated Shannon Entropy and TOPSIS for Product Design Concept Evaluation based on Bijective Soft Set,”, Journal of Intelligent Manufacturing, 2017, pp. 1-15. DOI: 10.1007/s10845-017-1346-y
  3. Taufik, Mohd., Kankar, P.K., Jain, P.K. and Tandon, Puneet, On the study of effect of coupled parameters of fused deposition modelling and CO2 laser operation for improved surface finish, Computer Aided Design and Applications, 2017 [Accepted for Publication]
  4. Deokar, Swapnil, Jain, P.K. and Tandon, Puneet, “Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis”, Materials Today: Proceedings, 2017, Vol. , pp. [Accepted for Publication]
  5. Kumar, Prabhat and Tandon, Puneet, “Classification and mitigation of uncertainty as per the product design stages: Framework and Case Study”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, Issue 2, pp. 1-22. DOI: 10.1007/s40430-017-0822-9
  6. Panjwani, Deepesh, Priyadarshi, S., Jain, P.K., Samal, M.K., Roy, D., Roy, J.J. and Tandon, Puneet, "A novel approach based on flexible supports for forming non-axisymmetric parts in SPIF", International Journal of Advanced Manufacturing Technology, 2017, Volume 92, Issue 5–8, pp 2463–2477. DOI: 10.1007/s00170-017-0223-3
  7. Gupta, Vikas and Tandon, Puneet, “Heterogeneous Composition Adaptation with Material Convolution Control Features”, ASME Journal of Computer and Information Science in Engineering, 2017, Vol. 17, pp. 021008-1 - 10. DOI: 10.1115/1.4034741
  8. Patel, Divyansh and Tandon, Puneet, “Experimental investigations of Gelatin enabled abrasive water slurry jet machining”, International Journal of Advanced Manufacturing Technology, 2017, Vol. 89, Issue 1-4, pp. 1193-1208, DOI: 10.1007/s00170-016-9154-7
  9. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “A Bijective soft set theoretic approach for concept selection in design process”, Journal of Engineering Design, 2017, Vol. 28, Issue 2, pp. 100-117. DOI: 10.1080/09544828.2016.1274718
  10. Pachaury, Yash and Tandon, Puneet, “An Overview of Electric discharge machining of ceramics and Ceramic based composites”, Journal of Manufacturing Processes, 2017, Vol. 25, pp. 369-390. DOI: 10.1016/j.jmapro.2016.12.010
  11. Nirala, H.K., Jain, P.K., Roy, J.J., Samal, M.K. and Tandon, Puneet, “An approach to eliminate stepped features in Multistage Incremental Sheet Forming Process: Experimental and FEA Analysis”, Journal of Mechanical Science and Technology, 2017, Vol. 31, Issue 2, pp. 599-604. DOI: 10.1007/s12206-017-0112-6

2016

  1. Kumar, Prabhat and Tandon, Puneet, “A paradigm for customer-driven product design approach using extended axiomatic design”, Journal of Intelligent Manufacturing, 2016, pp. 1-15. DOI: 10.1007/s10845-016-1266-2
  2. Singh, Ravindra and Tandon, Puneet, “User Values based Evaluation Model to Assess Product Universality”, International Journal of Industrial Ergonomics, 2016, Vol. 55, pp. 46–59. DOI: 10.1016/j.ergon.2016.07.006
  3. Sharma, Om Namah and Tandon, Puneet, “Experimental investigation into a new hybrid forming process: Incremental Stretch Drawing”, Proc. IMechE Part B: Journal of Engineering Manufacture, 2016, pp. 1-12, 0954405416645983, DOI: 10.1177/0954405416645983
  4. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Product Design Concept Evaluation using Rough Sets and VIKOR Method”, Advanced Engineering Informatics, 2016, Vol. 30, Issue 1, pp. 16-25 DOI: 10.1016/j.aei.2015.11.005

2015

  1. Patel, Divyansh and Tandon, Puneet, “Experimental investigations of thermally enhanced abrasive water jet machining of hard-to-machine materials”, CIRP Journal of Machining Science and Technology. DOI:10.1016/j.cirpj.2015.04.002
  2. Gupta, Vikas and Tandon, Puneet, “Heterogeneous object modeling with geometric references”, Computer Aided Design, 2015, Vol. 62, pp. 236-247. DOI:10.1016/j.cad.2014.12.005
  3. Kumar, Narendra, Shaikh, Saquib, Jain, P.K. and Tandon, Puneet, “Effect of fractal curve based toolpath on part strength in fused deposition modelling”, Int. J. Rapid Manufacturing, 2015, Vol. 5, No. 2, pp. 186-198. DOI: 10.1504/IJRAPIDM.2015.073576
  4. Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S., “Application of Artificial Neural Networks in Abrasive Water Jet Milling”, Procedia CIRP, 2015, Vol. 37, pp. 225-229. DOI: 10.1016/j.procir.2015.08.076
  5. Kumar, Vimlesh, Sambhav, Kumar and Tandon, Puneet, “Force Modeling in Ball-end Milling and its Application to Sculptured Surface Machining”, Journal of Material Science and Mechanical Engineering (JMSME) Print ISSN: 2339-9095; Online ISSN : 2393-9109; 2015, Volume 2, Number 6; pp. 4 – 8
  6. Shrivastava, Parnika and Tandon, Puneet, “Investigation of the effect of grain size on forming forces in Single Point Incremental Sheet Forming”, Procedia Manufacturing, 2015, Vol. 2, pp. 41-45, DOI:10.1016/j.promfg.2015.07.008
  7. Goel, V.K., Khanduja, D., Garg, T.K. and Tandon Puneet, “Computational Support in Design and Fabrication of Traditional Indian Jewellery”, Computer Aided Design & Applications, 2015, Vol. 12, No. 4, pp. 457-464. DOI:10.1080/16864360.2014.997642
  8. 23. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design decision automation support through knowledge template CAD model”, Computer Aided Design & Applications, 2015, Vol. 12, No. 1, pp. 96-103. DOI: 10.1080/16864360.2014.949580

2014

  1. Sambhav, K., Tandon, Puneet & Dhande, S.G., “Force modeling for generic profile of drills”, ASME Journal of Manufacturing Science and Engineering, 2014, Vol. 136, No. 4, pp. 041019-1-9. DOI: 10.1115/1.4027595
  2. Jain, Richa, Vasantha Kumar, M. and Tandon, Puneet, “Optimization methodology for beam gauges of the bus body for weight reduction”, Applied and Computational Mechanics, 2014, Vol. 8, No. 1, pp. 47-62
  3. Gupta, Vikas, Bajpai, V.K. and Tandon, Puneet, “Slice Generation and Data Retrieval Algorithm for Rapid Manufacturing of Heterogeneous Objects”, Computer Aided Design & Applications, 2014. Vol. 11, No. 3, pp. 255-262. DOI: 10.1080/16864360.2014.863483

2013

  1. Jain, V.K. and Tandon, Puneet, Editorial (2013) International Journal of Manufacturing Technology and Management, 27 (1-3), pp. 1-3.
  2. Gupta, T.V.K., Tandon, Puneet, Ramkumar J. and Vyas, N.S, “Role of Process Parameters on Pocket Milling with Abrasive Water Jet Machining Technique”, International Journal of Mechanical Science and Engineering, 2013, Vol. 7, No. 10, pp. 627-632
  3. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design Process Automation Support through Knowledge Base Engineering”, Lecture Notes in Engineering and Computer Science (LNECS), Volume 2, 2013, pp. 737-742
  4. Khan, M.R. and Tandon, Puneet, “Development of the geometry and its redesigning for a special shaped milling cutter”, Lecture Notes in Engineering and Computer Science (LNECS), Volume 1, 2013, pp. 526-531
  5. Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S, “A study on the deviations of the jet with traverse speeds on different materials during pocket milling using Abrasive Water Jet”, Applied Mechanics and Materials, 2013, Vol. 372, pp. 402-405. DOI: 10.4028/www.scientific.net/AMM.372.402
  6. Soni, S., Khanna, P. and Tandon, Puneet, “Knowledge Support System for Aesthetics in Product Design”, ASME Journal of Computer and Information Science in Engineering, 2013, Vol. 13, No. 1, pp. 011006-1-11. DOI:10.1115/1.402335
  7. Sambhav, K., Tandon, Puneet, Kapoor, S.G. and Dhande, S.G., “Mathematical Modeling of Cutting Forces in Microdrilling”, ASME Journal of Manufacturing Science and Engineering, February 2013, Vol. 135, Issue 1, 014501-1-8, DOI/10.1115/1.4007955
  8. Khan, Mohammed Rajik and Tandon, Puneet, Mathematical modeling of a generic multi-profile form milling cutter, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, May 2013, Vol. 227, No. 5, pp. 1036–1046. DOI:10.1177/0954406212455890
  9. Khan, Md Rajik and Tandon, Puneet, Parameterized Geometric Design of a Generic Form Milling Cutter, Computer Aided Design & Applications, 2013, Vol. 10, No. 5, pp. 757-765. DOI: 10.3722/cadaps.2013.757-765
  10. Pal, Vijay Kumar and Tandon, Puneet, Identification of role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet, International Journal of Advanced Manufacturing Technology, 2013, Vol. 66, No.5-7, pp. 877–881. DOI: 10.1007/s00170-012-4373-z
  11. Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “CAD Based Geometric and Force Modeling of Single Point Form-cutting Tools”, Computer Aided Design & Applications, 2013, Vol. 10, No. 1, pp. 45-57. DOI: 10.3722/cadaps.2013.45-57
  12. Soni, S., Khanna, P. and Tandon, Puneet, “Extended Axiomatic Design and Computational Support to Design for Aesthetics”, Computer Aided Design & Applications, 2013, Vol. 10, No. 1, pp. 1-15. DOI: 10.3722/cadaps.2013.1-15

2012

  1. Sambhav, K., Tandon, Puneet and Dhande, S.G., “Geometric modeling and validation of twist drills with a generic point profile”, Applied Mathematical Modelling, 2012, Vol. 36, pp. 2384-2403. DOI:10.1016/j.apm.2011.08.034
  2. Gupta, Vikas, Kasana, K.S. and Tandon, Puneet, “Reference Based Geometric Modeling for Heterogeneous Objects”, Computer Aided Design & Applications, 2012, Vol. 9, No. 2, pp. 155-165. DOI:10.3722/cadaps.2012.155-165
  3. Pal, Vijay and Tandon, Puneet, “A method to reduce milling time for Ti-6Al-4V Alloy Controlled Depth Milling using Abrasive Water Jet Machining”, Advanced Material Research, 2012, Vols. 383-390, pp. 1764-1768, DOI: 10.4028/www.scientific.net/AMR.383-390
  4. Pal, Vijay and Tandon, Puneet, “Effect of Abrasive Flow Rate in Milling with Abrasive Water Jet”, Applied Mechanics & Materials, 2012, Vols. 110-116, pp. 196-201. DOI:10.4028/www.scientific.net/AMM.110-116.196
  5. Vasal, Apurv, Mishra, Deepak and Tandon, Puneet, “A Novel and Cost Effective Approach to Public Vehicle Tracking System”, International Journal of UbiComp (IJU), 2012, Vol. 3, No. 1, pp. 33–44. DOI: 10.5121/iju.2012.3104