2023

  1. Pawar, K., Telang, V., Shahare, H.Y. and Tandon, P., 2023. Numerical Analysis of Progressive Cavity Pump Extruder for 3D Printing of High Viscosity Ceramic Paste. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023.
  2. Tiwari, V., Khanna, P. and Tandon, P., 2023. Capturing Design Intent during concept evaluation using rough numbers and TODIM Method. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023.
  3. Pawar, K., Telang, V., Shahare, H.Y. and Tandon, P., 2023. Numerical Analysis of Progressive Cavity Pump Extruder for 3D Printing of High Viscosity Ceramic Paste. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-003]
  4. Patil, I.G., Shahare, H.Y., Bhandarkar, V.V. and Tandon, P., 2023. Numerical Study of NonNewtonian Ceramic Slurry Flow in Extrusion-based Additive Manufacturing. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-005]
  5. Tiwari, V., Khanna, P. and Tandon, P., 2023. Capturing Design Intent during concept evaluation using rough numbers and TODIM Method. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-008]

2022

  1. Bhandarkar, V.V., Patil, I.G., Shahare, H.Y. and Tandon, P., 2022. Understanding the Influence of Process Parameters for Minimizing Defects in 3D Printed Parts Through Remote Monitoring. In: ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) (Track: Advanced Manufacturing), Columbus, OH, USA, 30 October – 3 November 2022
  2. Gupta, A., Nagargoje, A., Dubey, A.K. and Tandon, P., 2022. A Numerical Investigation to Compare Point Cloud and STL based Toolpath Strategies for 5-Axis Incremental Sheet Forming. In: ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) (Track: Advanced Manufacturing), Columbus, OH, USA, 30 October – 3 November 2022.
  3. Rajak, S.K., Kumar D., Seetharam R. and Tandon P., 2022. Mechanical and sliding wear analysis of Porcelain reinforced SAE660 Bronze bearing alloy composite fabricated by stir casting method. In: 13th Symposium on Plasticity and Impact Mechanics (IMPLAST-2022), IIT Madras, Chennai, India, 21-26 August 2022.
  4. Bedarkar H., Gupta A., Seetharam R. and Tandon P., 2022. Effect of Incremental Sheet Forming Process Parameters on Surface Roughness in Inconel 625 Sheets. In: 13th Symposium on Plasticity and Impact Mechanics (IMPLAST-2022), IIT Madras, Chennai, India, 21-26 August 2022

2021

  1. Dubey, A.K., Shahare, H.S., Pesin, A., Yu, H., Pustovoytov D. and Tandon, P., 2021, Numerical Modeling of a Hybrid Asymmetric Rolling and Bending Process, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021- 69553] [Accepted on 11-07-2021]
  2. Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021., Comparison of Clustering Techniques for Feature-Based Toolpath Generation in Dieless Manufacturing, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021-70255] [Accepted on 08-07-2021]
  3. Kausadikar, S., Tiwari, M.K, Ponappa, K. and Tandon, P., 2021. Design and analysis of innovative single screw extruder for hybrid manufacturing process. 2nd International Conference on Future Technologies 2021 (ICOFT 2021) in Manufacturing, Automation, Design and Energy (MADE 2.0)
  4. Mall, A.P. and Tandon, P., 2021. Design and Development of Heterogeneous Porous Scaffold - A Review, 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021), December 9-11, 2021
  5. Bhandarkar, V.B. and Tandon, P., 2021. A Review on Recent Techniques and Current Challenges in identifying defects in Additively Manufactured Metal Components, 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021), December 9-11, 2021
  6. Gohil, Y. and Tandon, P., 2021. Quantitative and Qualitative Study on Lifestyle of Polycystic Ovarian Syndrome or Disease (PCOS/PCOD) Patients, 19th International Conference on "Humanizing Work and Work Environment" HWWE 2021, December 1-3, 2021
  7. Gupta A.K., Shahare H.Y., Kumar P., Pustovoytov D., Yu H., Pesin A. and Tandon, P., 2021. Comparative Analysis of Surface Quality and Geometrical Feature for Deformation Machining in Bending Mode, 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), November 11-13, 2021
  8. Kumar, P., Shahare, H.Y. and Tandon P., 2021. Identification of Isotropic Hardening Law Parameters of AL1050 H14 Sheet for simulation of metal forming processes, 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), November 11-13, 2021
  9. Dubey, A.K., Shahare, H.S., Pesin, A., Yu, H., Pustovoytov D. and Tandon, P., 2021. Numerical Modeling of a Hybrid Asymmetric Rolling and Bending Process, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021- 69553] [Accepted on 11-07-2021]
  10. Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021. Comparison of Clustering Techniques for Feature-Based Toolpath Generation in Dieless Manufacturing, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021-70255] [Accepted on 08-07-2021]
  11. Singh, R. and Tandon, P., 2020. An approach to enhance product universality using vague numbers during initial design phase. In: 23rd International Conference on Engineering Design (ICED), Gothenburg, Sweden August 2021. [Accepted] [Submitted on 10 December 2020]

2020

  1. Shahare, H.S., Rajput, R. and Tandon, P., 2020, Investigation of Contact Conditions During Stamping of a Thin Plate, In: ASME International Mechanical Engineering Congress & Exposition 2020MECE, Portland, Oregon, USA, November 16 – 19, 2020. [Ref. No. 123615] [Presented by Puneet Tandon on Tuesday, 17 November 2020]
  2. Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. CFD analysis in a heating bed with two inlet and one outlet cooling configuration for application in AM process. Submitted to EMSME 2020: 1st International Conference on Energy, Materials Sciences & Mechanical Engineering - 2020, National Institute of Technology Delhi, New Delhi, India, 30 October - 1 November 2020. India [Presented by Gourav K. Sharma on Saturday, 31 October 2020] Published in Materials Today: Proceedings
  3. Sahu, A., Jain, P.K., and Tandon, P., 2020, Toolpath Generation of a Human Anatomical Shape for Double-Sided Incremental Forming, In: International Conference on Industrial and Manufacturing Systems (CIMS-2020), Dr B R Ambedkar National Institute of Technology Jalandhar, INDIA, 26-28 June 2020 9-11 October, 2020 [Ref. No. 322] [Presented by Akshay Sahu on Saturday, 10 October 2020]
  4. Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. Thermal and fluid flow modelling of a heating bed for application in metal AM process. In: RAME-2020: 2nd International Conference on Recent Advances in Mechanical Engineering, Delhi Technological University, Delhi. India, 18-19 September 2020. Paper No.: 151 [Presented by Gourav K. Sharma on Friday, 18 September 2020]
  5. Pesin, A., Pustovoytov, D., Yu, H. and Tandon, P., 2020. Development of theory and technologies for hybrid metal forming processes, In: The 13th International Conference on the Technology of Plasticity (ICTP 2020), The Ohio State University, Ohio Union, Columbus, Ohio, USA, 26-31 July 2020. [Accepted] [Paper ID: F2-011]

2019

  1. Nagargoje, A., Kankar, P.K., Jain, P.K and Tandon, P., 2019. Prediction of Thickness Profile of Axisymmetric Conical Part in Single Point Incremental Forming, In: International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore, 12-14 December 2019. [Presented by A. Nagargoje]
  2. Pesin, A., Tandon, P., Pustovoytov, D., Korchunov, A., Pesin. I. and Dubey, A., 2019. Numerical modelling and development of new technical solutions in metallurgy and material processing, In: 2019 The 4th International Conference on Functional Materials and Metallurgy, Osaka, Japan, 27-30 November 2019, Solid State Phenomena Submitted: 2019-12-07, 304, ISSN: 1662-9779, 2020 Trans Tech Publications Ltd, Switzerland Online: 2020-05-19, pp.113-119. [Presented by A. Pesin]
  3. Priyadarshi, S., Singh, S.A., Kumar, P. and Tandon, P., 2019. An Approach to Improve Thickness Distribution and Formability in Incremental Sheet Forming Process through improvised Blank Design. In: NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, 23-27 June 2019. [Presented by Puneet Tandon]
  4. Shrivastava, P. and Tandon, P., 2019. Revisiting micro-mechanical damage characterization for Single Point Incremental Forming process. In: NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, 23-27 June 2019. [Presented by Puneet Tandon]
  5. Shrivastava, P. and Tandon, P., 2019. Enhancement of Fracture Forming Limits by Crystallographic Texture Reformation of AA1050 Sheets in Single Point Incremental Forming. In: IOP Conf. Series: Materials Science and Engineering IDDRG 2019: International Deep Drawing Research Group 38th Annual Conference, Enschede, The Netherlands, 3-7 June 2019, 651(1), 012074, pp.1-7. doi:10.1088/1757-899X/651/1/012074
  6. Dabholkar, A.P., Pande, S. and Tandon, P., 2019, Design Toolkit for Sustainable Ideation. In: The LeNS World Distributed Conference – Design for Sustainability for All. Bangalore, 3-5 April 2019. [Presented by Ameya Dabholkar and Shivangi Pande]
  7. Deokar, S.U., Jain, P.K., Tandon, P. and Pathak, A., 2019. Analysis of Springback and Force behavior in Single Point Incremental Sheet Forming though FEA. In: International Conference of Materials Processing and Characterization (ICMPC-2019), GRIET, Hyderabad, India, 8-9 March 2019. [Presented by Swapnil U. Deokar]
  8. Modi, S.R., Kankar, P.K. and Tandon, P., 2019. Finite Element Analysis of Langevin Bolted Ultrasonic Transducer for Incremental Sheet Forming Process. In: NFEST 2019: 2nd International Conference on New Frontiers in Engineering, Science & Technology, N.I.T., Kurukshetra, India, 18-22 February 2019. [Presented by Sitaram Modi]

2018

  1. Singh, S.A. and Tandon, P., 2018. Comparative Analysis of Incremental Sheet Forming at Ambient and Elevated Temperatures using Finite Element Modeling. In: 19th ISME Conference – Advances in Mechanical Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India, 20-22 December 2018, pp.15. [Presented by Swarit Anand Singh]
  2. Dayam, S., Priyadarshi, S. and Tandon, P., 2018. Simulation of Extrusion of Thermoplastic Binder in Additive Manufacturing Process. In 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018), Anna University, Chennai, INDIA, 13-15 December 2018. [Presented by Sunidhi Dayam]
  3. Tiwari, V., Jain, P.K. and Tandon, P., 2018. Bio-Inspired Knowledge Representation Framework for Decision Making in Product Design. In: 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2018), Anna University, Chennai, INDIA, 13-15 December 2018. [Presented by Sunidhi Dayam]
  4. Gupta, A., Raju, P.P., Priyadarshi, S., and Tandon, P., 2018. Deformation Machining. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.37 [Presented by P. Kumar and P.P. Raju]
  5. Hasan, A., Sahu, A., Manish, N. Singh, S.A., Modi, S., Nagargoje, A., Raju, P.P., Kumar, P., Priyadarshi, S., Kankar, P., Jain, P.K., and Tandon, P., 2018. Adaptive Double Sided Incremental Forming. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.38 [Presented by P. Kumar and P.P. Raju]
  6. Singh, S.A., Priyadarshi, S., and Tandon, P., 2018. Review of Incremental Sheet Forming Process at Elevated Temperature. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.39 [Presented by P. Kumar and P.P. Raju]
  7. Shrivastava, P. and Tandon, P., 2018. Efficiency Enhancement of Single Point Incremental Forming Simulation by Mitigating Hourglass Phenomenon. In: The 8th International Conference on Research in Engineering, Science and Technology, Paris, France, 2-4 November 2018, pp.81-89. [Presented by Parnika Shrivastava]
  8. Pesin A., Chukin M., Tandon P., Pustovoitov D., Drigun E., Pesin I. and Kozhemyakina A. 2018. Development of Theory and Technologies for Hybrid Metal Forming of Steel Complex Parts. In: 27th International Conference on Metallurgy and Materials - METAL 2018, Brno, Czech Republic, 23-25 May 2018. [Presented by Alexander Pesin]
  9. Priyadarshi, S., Verma, S., and Tandon, P., 2018. Development of Double Sided Incremental Forming Strategies for Improvement in Part Accuracy. Twelfth International Tools and Methods of Competitive Engineering (TMCE) Symposium, Las Palmas de Gran Canaria, Spain, 7 -11 May 2018. [Presented by Puneet Tandon]
  10. Vispute, M., Kumar, N., Jain, P.K., Tandon, P., and Pandey, P.M., 2018. Shrinkage Compensation Study for Performing Machining on Additive Manufactured Parts. 8th International Conference of Materials Processing and Characterization (ICMPC), Hyderabad, India, 16-18 March 2018, pp. 79. [Presented by Mayur Vispute]
  11. Shrivastava, P., and Tandon, P., 2018. Deformation induced Surface Roughness and Global Spring Back resulted with different plastic strain levels in Incremental Forming of original and preheated sheet samples. 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS), IIITDM Jabalpur, India, 26-28 February 2018. [Presented by Parnika Shrivastava]
  12. Vispute, M., Kumar, N., Jain, P. K., Tandon, P., Pandey, P. M., 2018. On the Surface Finish Improvement Through Hybrid Additive Subtractive Manufacturing Process. 3rd International Conference on Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (IDAD), Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, India, 22-24 February 2018. [Presented by Mayur Vispute]

2017

  1. Singh, Sudhir Kumar, and Tandon, Puneet, “Comparison of Heterogeneous Modeling Based Different Patterns of Hip Prosthesis Design”, International Conference on Computational Biology 2017 (ICCB'17), World Congress on Engineering and Computer Science 2017 (WCECS 2017), San Francisco, USA, October 25-27, 2017, Ref. No. ICCB_9, pp. [Presented by Puneet Tandon]
  2. Kumar, Pavan, and Tandon, Puneet, “Estimation of Material Model Parameters from Mixed Loading Test for effective Simulation of Incremental Sheet Forming”, International Conference on Modeling, Simulation and Control 2017 (ICMSC'17), World Congress on Engineering and Computer Science 2017 (WCECS 2017), San Francisco, USA, October 25-27, 2017, Ref. No. ICMSC_12, pp. [Presented by Puneet Tandon]
  3. Deokar, Swapnil, Jain, P.K., and Tandon, Puneet, “Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis”, International Conference on Advances in Materials and Manufacture Applications (IConAMMA 2017), Bengaluru, India, August 17-19, 2017, Ref. No. IConAMMA_2017_66, pp. [Presented by Swapnil Deokar]
  4. Amar, Animesh Kumar, and Tandon, Puneet, “Study of effect of addition of a polymer on abrasive water jet machining by simulation”, International Conference on Manufacturing Technology and Simulation (ICMTS 2017), IIT Madras, Chennai, India, July 7-8, 2017, pp. [Presented by Animesh K. Amar]
  5. Kumar, Narendra, Jain, P.K., Tandon, Puneet, and Pandey, P.M., “Experimental investigations on suitability of polypropylene (PP) and ethylene vinyl acetate (EVA) in additive manufacturing”, 7th International Conference of Materials Processing and Characterization (ICMPC 2017), March 17-19, 2017, Hyderabad, India
  6. Khan, Amaltas, and Tandon, Puneet, "Closing the Loop: ‘Systems Perspective’ for the Design of Food Packaging to facilitate Material Recovery", 6th International Conference on Research into Design (ICoRD’ 17), January 9-11, 2017, Indian Institute of Technology Guwahati, India, Published in Smart Innovation, Systems and Technologies, Vol. 66 [Research into Design for Communities, Vol. 2, A. Chakrabarti and D. Chakrabarti (eds.), Proceedings of ICoRD 2017], pp. 349-360
  7. Kumar, Prabhat, and Tandon, Puneet, "Improvised concept development process in design through product ingredients", 6th International Conference on Research into Design (ICoRD’ 17), January 9-11, 2017, Indian Institute of Technology Guwahati, India, Published in Smart Innovation, Systems and Technologies, Vol. 66 [Research into Design for Communities, Vol. 2, A. Chakrabarti and D. Chakrabarti (eds.), Proceedings of ICoRD 2017], pp. 453-464.

2016

  1. Dwivedi, Divyansh, Kumar, A., Priyadarshi, S., Jain, P.K., and Tandon, Puneet, “Numerical Prediction of Fracture in Parts formed with Incremental Sheet Forming Process”, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016, College of Engineering, Pune, INDIA [Presented by Divyansh Dwivedi]
  2. Chetani, Aman, Priyadarshi, Satwik, Kumar, Pavan, Jain, P.K., and Tandon, Puneet, “State of the Art in Double Sided Incremental Forming”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
  3. Kumar, Pavan, Priyadarshi, Satwik, Chetani, Aman and Tandon, Puneet, “Finite Element Modelling of Double Sided Incremental Forming“, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
  4. Priyadarshi, Satwik, Kumar, Pavan, Chetani, Aman, Jain, P.K. and Tandon, Puneet, “Generation of Automatic Multi-Pass tool path for Incremental Sheet Forming”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
  5. Kumar, Abhishek, Dwivedi, Divyansh, Priyadarshi, Satwik, Tandon, Puneet, “Numerical Modelling of Incremental Sheet Forming Process with Copper Sheets”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Abhishek Kumar]
  6. Singh, Ravindra, and Tandon, Puneet, A Sustainable Approach to Develop Universal Products, 6th International Kansei Engineering and Emotion Research Conference (KEER 2016), August 31- September 2, 2016, University of Leeds, UK, Paper # 99 [Accepted for presentation]
  7. Ganesh, S., and Tandon, Puneet, Process-centric design solutions for unorganized sectors in developing country, 6th International Kansei Engineering and Emotion Research Conference (KEER 2016), August 31- September 2, 2016, University of Leeds, UK, Paper # 185 [Accepted for presentation]
  8. Ordonez, Isabel, Khan, Amaltas, Tandon, Puneet, Rexfelt, Oskar, Designing with Waste: comparison of two Practice-based Education cases, 18th International Conference on Engineering & Product Design Education (EPDE 2016), September 8-9, 2016, Aalborg University, Denmark, Paper No. 1282 [Accepted for presentation]
  9. Kumar, N., Jain, P.K., Tandon, Puneet and Pandey P.M., Toolpath Generation for Additive Manufacturing using CNC Milling Machine, 6th International Conference on Additive Manufacturing Technologies - AM 2016, October 6-7, 2016, Bangalore, INDIA [Presented by Narendra Kumar]
  10. Panjwani, Deepesh, Jain, P.K., Samal, M.K., Roy, J.J,Roy, D. and Tandon, Puneet Tandon, Single Point Incremental Forming Using Flexible Die, 28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (28 CARS & FoF 2016), January 6-8, 2016, College of Engineering and Management, Kolaghat, WB, India, Paper No. 101 [Presented by Dr. Debanik Roy]
  11. Shaikh, Saquib, Kumar, Narendra, Jain, P.K., and Tandon, Puneet, Hilbert Curve Based Toolpath for FDM Process, 28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (28 CARS & FoF 2016), January 6-8, 2016, College of Engineering and Management, Kolaghat, WB, India, Paper No. 101 [Presented by Mr. Narendra Kumar]

2015

  1. Pachaury, Yash and Tandon, Puneet, A Holistic Modelling for Numerical Simulation of Electric Discharge Machining Process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-50860 [Presented by Puneet Tandon]
  2. Shrivastava, Parnika, Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Parameter Optimization of AA1050A in Incremental Sheet metal forming process based on Taguchi design and response surface methodology, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-51227 [Presented by Puneet Tandon]
  3. Sahu, Govind N., Saxena, Sumit, Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Shell element formulation based Finite Element modeling, analysis and experimental validation of incremental sheet forming process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-53146 [Presented by Puneet Tandon]
  4. Kumar, Pavan, Priyadarshi S., Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Effect of Tool shape on Surface Finish of components formed through Incremental Sheet Forming process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-53282 [Presented by Puneet Tandon]
  5. Priyadarshi, Satwik, Jain, P.K., Roy, J.J., Samal, M.K., Roy, D. and Tandon, Puneet, “Feature based assessment of forming force behavior in Incremental Sheet Forming”, WSCG’2015, 23rd International Conference on Computer Graphics, Visualization and Computer Vision 2015, Plzen, Czech Republic, June 8 - 12, 2015, Vol.: 23, Issue: P, pp.: 95-104 [Presented by Satwik Priyadarshi]
  6. Khan, Amaltas and Tandon, Puneet, “Design for multiple life cycles: A teaching-learning pedagogy for designing products for multiple life cycles”, The Third International Conference on Creativity and Innovations at Grassroots, IIM Ahmedabad, January 19-22, 2015, [Presented by Amaltas Khan]
  7. Kumar, Prabhat and Tandon, Puneet, “Uncertainty and Decision Making in Product Design: A Fuzzy Approach”, The Third International Conference on Design Creativity (3rd ICDC), IISc Bangalore, January 12-14, 2015, pp. 174-181. ISBN 978-1-904670-60-5. [Presented by Prabhat Kumar]

2014

  1. Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas N.S., "Application of Grey Relational Analysis for Geometrical Characteristics in Abrasive Water Jet Milled Channels", 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014, IIT Guwahati, December 12-14, 2014, pp. 393-1 - 393-6
  2. Jain, Vandana and Tandon, Puneet, “Effect of Slurry Temperature on Kerf Taper angle in Abrasive Water Jet Machining”, 2nd International Conference on Innovations in Engineering and Technology (ICCET’2014) (Organized by International Institute of Engineers), Penang (Malaysia), September 19-20, 2014, pp. 77-82. DOI: 10.15242/IIE.E0914033
  3. Gupta, T.V.K., Ramkumar J., Tandon, Puneet and N S Vyas, "State of the art on Abrasive Water Jet milling: Challenges ahead", International Colloquium on Materials, Manufacturing and Metrology, ICMMM 2014, IIT Madras, Chennai, India, August 8-9, 2014. Ref No. ICM2586, pp. 303-304
  4. Soni, S., Khanna, P. and Tandon, Puneet, ‘Computational support to aesthetics in industrial design”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-107] [Presented by Varun Tiwari]
  5. Goel, V.K., Khanduja, D., Garg, T.K. and Tandon Puneet, “Computational Support to design and fabrication of traditional Indian jewellery”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-057] [Presented by VK Goel]
  6. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design decision automation support through knowledge template CAD model”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-012] [Presented by Varun Tiwari]

2013

  1. Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S, “Influence of process parameters on the dimensions of the channels prepared using abrasive water jet machining”, 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA. Ref No. IMECE2013-64063
  2. Patel, Divyansh and Tandon, Puneet, “Optimization of Kerf Surface and Material Removal Rate using Abrasive Water-Slurry Jet machining setup”, 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA. Ref No. IMECE2013-64245
  3. Soni, S., Khanna, P. and Tandon, Puneet, “Generative Evolutionary Action Grammar Based Form Exploration”, 2013 ASME 33rd Computers and Information in Engineering (CIE) Conference and International Design Engineering Technical Conference (IDETC), August 4-7, 2013, Portland, OR, USA. Ref No. IDETC/CIE #13024
  4. Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design Process Automation Support through Knowledge Base Engineering”, The 2013 International Conference of Computational Intelligence and Intelligent Systems, World Congress on Engineering 2013, London, U.K., July 3-5, 2013, Ref. No. ICCIIS_33, pp. 737-742. [Presented by Puneet Tandon]
  5. Khan, M.R. and Tandon, Puneet, “Development of the geometry and its redesigning for a special shaped milling cutter”, The 2013 International Conference of Manufacturing Engineering and Engineering Management, World Congress on Engineering 2013, London, U.K., July 3-5, 2013, Ref. No. ICMEEM_151, pp. 526-531. [Presented by M. Rajik Khan]
  6. Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “Force Modeling for Generic Profile of Drills”, ASME 2013 International Manufacturing Science and Engineering Conference (MSEC 2013), June 10-14, 2013, Madison, Wisconsin, USA. Ref. No. MSEC2013-1262
  7. Patel, Divyansh, Singh, Abhilasha and Tandon, Puneet, “Additive manufacturing of Casting Die with ideal shapes of gating system through Rapid Tooling”, National Conference on Recent Trends in Manufacturing & Technology (RTMST 2013), National Institute of Technical Teachers’ Training & Research, Kolkata, India, April 18-19, 2013, pp. 36-45.

2012

  1. Gupta, T.V.K., Ramkumar, J., Vyas, N.S., Tandon, Puneet, “Material removal rate prediction for blind pocket milling of SS304 using Abrasive Water Jet Machining Process”, International Conference on Engineering and Applied Science (HKICEAS 2012), December 14-16, 2012, Hong Kong, pp. 368-375 (Paper No. 411). [Presented by TVK Gupta]
  2. Pachori, R., Sharma, O.N., Jain, P.K., Tandon, Puneet, “Effect of Tool Geometry on Dieless Manufacturing”, 4th International and 25th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2012, Jadavpur University, Kolkata, India, December 14-16, 2012, pp. 22-27. [Presented by Rahul Pachori]
  3. Gupta, T.V.K., Ramkumar, J., Vyas, N.S., Tandon, Puneet, “A preliminary investigation on the forces generated with process parameters during Abrasive Water Jet Milling on SS304”, International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India (Paper No. 2032). [Presented by TVK Gupta]
  4. Pal, Vijay, Chaudhary S.K. and Tandon, Puneet, “Time Reduction by using Square Path and Ellipical Path in Controlled Depth Milling using Abrasive Water Jet Machining”, International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Vijay Pal
  5. Tiwari, V., Jain, P.K. and Tandon, Puneet, “Development of Knowledge Base Engineering Tools through Knowledge Fusion” International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Varun Tiwari]
  6. Soni, S., Khanna, P. and Tandon, Puneet, “Interactive Evolutionary System for Product Design”, International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by S. Soni]
  7. Gulati, V., Singh, K. and Tandon, Puneet, “Computer generated Indian traditional decorative patterns for Woodcraft” International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Kulwant Singh]
  8. Kumar, P. and Tandon, Puneet, “An Integrated Approach to minimize Product Design Iterations” International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Prabhat Kumar]
  9. Warisawa, S., Tsuchiya, K., Gupta, V.K., Sheorey, T. and Tandon, Puneet, “Design and analysis of a micro pump for wearable blood sampling system”, 2012 ASME-ISPS / JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2012), June 18-20, 2012, Santa Clara, California, USA [Presented by Shin’chi Warisawa]
  10. Soni, S., Khanna, P. and Tandon, Puneet, “Capturing the Aesthetic Design Intention in Product Design”, Ninth International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, May 7 -11, 2012, Karlsruhe, Germany.
  11. Sambhav, Kumar, Tandon, Puneet, Kapoor, S.G. and Dhande, S.G., “Mathematical Modeling of Cutting Forces in Micro-Drilling”, ASME 2012 International Manufacturing Science and Engineering Conference, MSEC 2012, June 4-8, 2012, Notre Dame, Indiana, USA, [MSEC2012-7399], pp. 979-986.
  12. Tandon, Puneet, “Additive Manufacturing”, National Seminar on Advancement in Material Processing and Production Technology, GGITS, Jabalpur, February 24-25, 2012, pp. 29-32. (Invited Paper) [Presented by Puneet Tandon]

© 2023 deLOGIC Lab. All Rights Reserved.